1. Termék végeview
A naplóTag UHADO-16 is a versatile, multi-use USB PDF temperature and humidity data logger. It features a built-in display that shows the most recent readings and can generate comprehensive reports (PDF, CSV, LTD) without requiring proprietary software or hardware at the destination. Users can also review minimum and maximum recorded trip values directly on the display without needing a PC.
1. ábra: NaplóTag UHADO-16 Multi-use Data Logger
2. Főbb jellemzők
- Records and displays Temperature & Humidity readings simultaneously.
- Stores up to 16,000 sets of recordings, sufficient for extended monitoring periods.
- Real-time clock provides accurate date/time stamps for every recording.
- Equipped with a USB micro-port for direct connection to a computer.
- Automatically generates PDF, CSV, and LTD reports without requiring specialized software.
- Supports fast data download using the standard LogTag Interface cradle (sold separately).
- User-configurable settings for alarm thresholds, logging intervals, and trip duration.
- Allows for in-transit inspections to be recorded with a simple button press.
- Features a user-replaceable coin cell battery.
Figure 2: Key features of the UHADO-16 Data Logger
3. A doboz tartalma
- 1 x LogTag UHADO-16 Temp/RH logger with display and USB
4. Beállítás
Before initial use, it is recommended to configure the UHADO-16 data logger using the LogTag Analyzer software. This software allows you to set parameters such as logging interval, alarm thresholds, and start/stop conditions. The logger connects to your computer via its integrated USB micro-port or an optional LogTag Interface cradle for faster downloads.
3. ábra: NaplóTag UHADO-16 connected via an Interface Cradle (sold separately)
5. Használati útmutató
The UHADO-16 data logger is designed for straightforward operation. Below are instructions for starting, stopping, and reviewing data directly on the device.
5.1. A naplózó indítása
To begin logging, press and hold the START/JELÖLÉS gombot, amíg a kijelző meg nem jelenik REC+ or FELVÉTEL. If the logger is pre-configured for a delayed start, it will show dts (date/time start) or St (start delay) before logging begins. If configured for a push-button start, KÉSZ will display until the button is pressed.
5.2. Újraviewing Data During Logging
During active logging, the display will show the current temperature and humidity. You can review the minimum and maximum recorded values by briefly pressing the STOP/REVIEW button. Each press will cycle through the current reading, maximum temperature (MAX), and minimum temperature (MIN). A checkmark indicates no alarm excursions, while an arrow or cross symbol indicates an alarm threshold has been triggered or an alarm event occurred.
5.3. A naplózó leállítása
If the logger is configured for manual stopping, press and hold the STOP/REVIEW gombot, amíg LEÁLLÍTOTT appears on the display. Logging will cease, and the recording indicator will disappear. After stopping, a checkmark or cross symbol will indicate if any alarm events occurred during the entire logging period.
5.4. Marking an Event
During logging, a brief press of the START/JELÖLÉS button will place an inspection mark in the data. The MARK symbol will appear on the display and remain until the next reading is taken. This mark will be visible in the downloaded data, indicating a specific event or inspection point.
5.5. Oktatóvideó
For a visual guide on operating the UHADO-16, please watch the official instructional video below:
Video 1: Instructions for UHADO-16 Data Logger
This video provides a detailed walkthrough of the UHADO-16's display indicators and button functionalities, including how to start logging, review minimum/maximum temperatures, and stop the device.
6. Karbantartás
6.1. Elemcsere
The UHADO-16 uses a user-replaceable CR2032 coin cell battery. When the battery indicator on the display shows low power, replace the battery promptly to ensure continuous and accurate logging. Refer to the detailed instructions provided with the device for safe battery replacement procedures.
7. Hibaelhárítás
If you encounter any issues with your LogTag UHADO-16, consider the following:
- Az eszköz nem válaszol: Ellenőrizze az elem töltöttségi szintjét. Ha alacsony, cserélje ki a CR2032 elemet.
- Adatátviteli problémák: Ensure the logger is correctly inserted into the USB port or interface cradle. Verify that the LogTag Analyzer software is installed and running.
- Pontatlan leolvasások: Ensure the logger is placed in an environment where air can circulate freely around it and is not exposed to direct heat sources or extreme conditions beyond its specified operating range.
- Üres kijelző: This typically indicates a depleted battery. Replace the battery.
For further assistance, refer to the comprehensive troubleshooting guide available on the LogTag website or contact LogTag támogatás.
8. Műszaki adatok
| Attribútum | Érték |
|---|---|
| Tétel modellszáma | UHADO-16 |
| Csomag méretei | 5.55 x 3.98 x 1.54 hüvelyk |
| Tétel súlya | 2.08 uncia |
| Elemek | 1 db CR2032 elem szükséges (tartozék) |
| Akkumulátor leírása | Lítium |
| Szín | Fehér/Kék |
| Szerelés típusa | Asztali |
| Felső hőmérséklet -besorolás | 158 Fahrenheit fok |
| Gyártó | NaplóTag Észak-Amerika, Inc. |
9. Garancia és támogatás
Specific warranty details for the LogTag UHADO-16 are typically provided at the point of purchase or within the product packaging. For detailed warranty information, please refer to your purchase documentation or visit the official LogTag webtelek.
NaplóTag offers comprehensive support through its global distributor network, reaching over 100 countries worldwide. For technical assistance, product inquiries, or to find a local distributor, please visit the NaplóTag Áruház az Amazonon or the main LogTag webtelek.
