Bevezetés
This manual provides detailed instructions for the installation, operation, and maintenance of the Venstar T4900 Commercial Voyager Wi-Fi Programmable Thermostat. The T4900 is designed for commercial applications, offering advanced control over heating and cooling systems with features such as Wi-Fi connectivity, Alexa compatibility, and multi-stage programozás.
Please read this manual thoroughly before attempting installation or operation to ensure proper functionality and to avoid potential damage to the unit or your HVAC system.
Biztonsági információk
- Always turn off power to the heating and cooling system at the main fuse or circuit breaker panel before installing or servicing the thermostat.
- Installation should be performed by a qualified HVAC technician or electrician.
- Győződjön meg arról, hogy minden vezetékcsatlakozás biztonságos, és megfelel a helyi elektromos előírásoknak.
- Do not short circuit the terminals on the gas valve or primary control to test the thermostat. This will damage the thermostat and void the warranty.
- This thermostat operates on 24 Volts AC. Do not connect to line voltage (120V/240V).
A csomag tartalma
Ellenőrizze, hogy a csomag tartalmazza-e a következő elemeket:
- Venstar T4900 Commercial Voyager Thermostat
- Rögzítőelemek (csavarok és fali tiplik)
- Installation Guide / User Manual (this document)
Image: Venstar T4900 Thermostat shown alongside its retail packaging, illustrating the product as it appears when unboxed.
Beállítás és telepítés
1. Elhelyezkedés
A termosztátot körülbelül 1.5 méterrel a padló felett szerelje fel, jó légáramlású helyre, közvetlen napfénytől, huzattól és hőforrásoktól távol. Kerülje az ablakok, ajtók vagy szellőzőnyílások közelét, amelyek befolyásolhatják a hőmérséklet-mérést.
2. Kikapcsolás
Before beginning installation, ensure the power to your HVAC system is completely turned off at the circuit breaker.
3. Remove Old Thermostat
Carefully remove your old thermostat from the wall. Take a picture of the existing wiring connections before disconnecting any wires. Label each wire with the terminal designation it was connected to.
4. Mount the New Thermostat
- Separate the front cover from the thermostat base.
- Position the thermostat base on the wall, feeding the wires through the opening.
- Mark the mounting holes. Drill pilot holes if necessary.
- Secure the thermostat base to the wall using the provided screws and anchors.
Kép: Hátulról view of the Venstar T4900 Thermostat, showing the wiring terminals and mounting plate for installation.
5. Huzalozás
Connect the wires to the corresponding terminals on the T4900 thermostat base. Refer to the wiring diagram specific to your HVAC system type (e.g., conventional, heat pump). The T4900 supports 4 Heat Stages & 2 Cool Stages.
Fontos: If only 4 wires are available for installation, the Venstar Add-A-Wire accessory (PN# ACC0410) may be required. Consult the Add-A-Wire installation instructions for details.
6. Attach Front Cover and Power On
Once wiring is complete, carefully attach the front cover to the thermostat base. Restore power to your HVAC system at the circuit breaker.
7. Kezdeti konfiguráció
Upon first power-up, the thermostat may guide you through initial setup steps, including system type selection and basic date/time settings. Follow the on-screen prompts.
Kép: elöl view of the Venstar T4900 Thermostat, displaying its screen and control buttons.
Kezelési útmutató
Kijelző és gombok
The T4900 features a large, easy-to-read display with adjustable backlight intensity and backlit, color-coded buttons for intuitive control.
- Fel/le nyilak: Adjust temperature setpoints, navigate menus, and change settings.
- Mód gomb: Cycles through system modes (Heat, Cool, Auto, Off).
- Ventilátor gomb: Cycles through fan modes (Auto, On).
- Menü gomb: Hozzáférés a speciális beállításokhoz és programozási opciókhoz.
Programozás
The T4900 offers flexible programming options:
- 7 napos programozás: Customize schedules for each day of the week.
- 5+1+1 Day Programming: Set one schedule for weekdays, and separate schedules for Saturday and Sunday.
- 1 napos programozás: A single schedule applies to all days.
- Up to 3 Occupied Periods Per Day can be programmed.
- 365 Day Holiday Programming: Allows for specific holiday schedules.
Access programming settings via the Menu button and follow the on-screen instructions to set desired temperatures and times for each period.
Wi-Fi Connectivity and Smart Features
For Wi-Fi operation and smart features, the Venstar Wi-Fi Module (Part Number: ACC-VWF1) is required. Once installed and configured, you can:
- Control the thermostat remotely via a smartphone app.
- Integrate with Amazon Alexa for voice control.
- Utilize Advanced Demand Response (ADR) capabilities.
- Receive Equipment Fault Detection (FDD) notifications.
- Access API for 3rd party monitoring and control systems.
Refer to the ACC-VWF1 module's specific instructions for Wi-Fi setup and app integration.
Speciális funkciók
- Adjustable Deadbands and Timers: Configure the temperature differential and minimum run times between stages.
- Remote Sensor Averaging: The thermostat can average readings from one remote sensor with its internal sensor.
- Pre-Occupancy Fan Purge: Circulates air before occupancy periods.
- Light Activated: Features that respond to ambient light conditions.
- Energy Watch: Monitors and displays energy usage data.
Karbantartás
A termosztát tisztítása
To maintain the appearance and functionality of your thermostat:
- Törölje le a külső felületet puha, damp szövet.
- Ne használjon súroló hatású tisztítószereket vagy oldószereket.
- Ügyeljen arra, hogy ne kerüljön nedvesség a belső alkatrészekbe.
The Venstar T4900 does not use batteries; it is powered by your HVAC system's 24V AC supply.
Hibaelhárítás
| Probléma | Lehetséges ok | Megoldás |
|---|---|---|
| A termosztát kijelzője üres. | Nincs áram a termosztáton. | Ellenőrizze a HVAC rendszer áramkör-megszakítóját. Győződjön meg arról, hogy az összes vezetékcsatlakozás biztonságos. |
| A fűtési/hűtési rendszer nem reagál. | Incorrect system mode, wiring issue, or system fault. | Verify the thermostat is in the correct mode (Heat/Cool/Auto). Check wiring connections. If FDD (Equipment Fault Detection) is enabled, check for fault notifications. |
| A hőmérséklet-mérések pontatlannak tűnnek. | Termosztát helye, érzékelő probléma. | Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources. If using a remote sensor, verify its placement and connection. |
| Nem lehet csatlakozni a Wi-Fi-hez. | Wi-Fi module not installed, incorrect setup, network issues. | Biztosítsa a ACC-VWF1 Wi-Fi Module is correctly installed. Follow the Wi-Fi module's specific setup instructions. Check your Wi-Fi network status. |
For further assistance, please contact Venstar customer support.
Műszaki adatok
| Márka | Venstar |
| Modell neve | Venstar T4900 Commercial Voyager |
| Vezérlő típusa | Wi-Fi, Amazon Alexa (with ACC-VWF1 module) |
| Különleges jellemzők | Phone App Available, Temperature Sensor, Humidity Sensor, Dehumidification Control, 7-Day Programmable, 365 Day Calendar, Pre-occupancy Fan Purge, Up to 4 Hours Override, ADR Ready, FDD Notification, API for 3rd party monitor & control |
| Szín | Fehér |
| A termék speciális felhasználása | HVAC Control (Heating, Cooling, Humidification, Dehumidification) |
| Hőmérsékletszabályozás típusa | Both (Heating and Cooling) |
| Csatlakozási technológia | Wi-Fi (with ACC-VWF1 module), Z-Wave (optional, not specified in product details), Wireless (Wi-Fi) |
| Áramforrás | AC/DC (24 volt) |
| Voltage | 24 Volt |
| Alak | Négyszögletes |
| Kijelző típusa | Digitális |
| Vezérlés típusa | Gombvezérlés |
| Ellenőrzési módszer | Voice (via Alexa with ACC-VWF1), Manual Buttons |
| Kapcsolati protokoll | Wi-Fi |
| Szerelés típusa | Fali tartó |
| Háttérvilágítás | Igen |
| Tétel súlya | 10.4 uncia |
| Termék méretei | 2.3 x 6.3 x 5 hüvelyk |
| Tétel modellszáma | T4900 |
| UPC | 748528959706 |
Jótállási információk
The Venstar T4900 Commercial Voyager Thermostat comes with a 1 év gyártói garancia. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or visit the official Venstar webtelek.
Támogatás
If you require further assistance, have questions about installation, operation, or troubleshooting, please contact Venstar customer support:
- Visit the official Venstar webGYIK-et, támogatási dokumentumokat és elérhetőségeket tartalmazó oldal.
- Contact your authorized Venstar dealer or installer.
For information on optional accessories like the Add-A-Wire (ACC0410) or Wi-Fi Module (ACC-VWF1), please refer to their respective documentation or the Venstar webtelek.
