NaplóTag TREX-8-AMZ

TREX-8 Temperature Data Recorder User Manual

Model: TREX-8-AMZ

Márka: LogTag

Termék végeview

A naplóTag TREX-8 is an advanced external probe temperature recorder designed for accurate and cost-effective electronic temperature monitoring. It integrates state-of-the-art technology with innovative design to provide a high-performance data logging system. This model comes equipped with an ST100S-15 External Probe, essential for precise temperature measurements. Please note that an LTI-HID Docking Station is required for operation and software download, which is available as a free download.

NaplóTag TREX-8 Temperature Data Recorder with remote probe

Image: The LogTag TREX-8 Temperature Data Recorder unit with the ST100S-15 remote probe connected.

Főbb jellemzők

A csomag tartalma

The TREX-8 Temperature Data Recorder package typically includes:

Note: The LTI-HID Docking Station is required for operation and software download, but is sold separately.

Beállítás

1. Szoftver telepítése

Before using the TREX-8, download and install the LogTag Analyzer software from the official LogTag website. This software is essential for configuring the recorder, downloading data, and viewing temperature logs.

2. A dokkolóállomás csatlakoztatása

Connect the LTI-HID Docking Station (sold separately) to your computer's USB port. Ensure the necessary drivers are installed, which are typically included with the LogTag Elemző szoftver.

NaplóTag TREX-8 inserted into LTI-HID Docking Station

Image: The LogTag TREX-8 temperature recorder unit inserted into the LTI-HID docking station, ready for connection to a computer.

3. Connecting the Remote Probe

Carefully insert the connector of the ST100S-15 remote probe into the designated port on the TREX-8 data recorder. Ensure a secure connection.

NaplóTag TREX-8 with remote probe connected

Image: The LogTag TREX-8 temperature recorder with the ST100S-15 remote probe securely connected to its input port.

ST100S-15 1.5M Remote Probe

Image: The ST100S-15 1.5-meter remote temperature probe, coiled, showing its connector and sensor tip.

Kezelési útmutató

1. Configuring the Recorder

Place the TREX-8 into the LTI-HID Docking Station. Open the LogTag Analyzer software. The software will detect the connected recorder. Use the software to configure logging parameters such as start delay, logging interval, alarm thresholds, and recording duration.

2. Starting a Recording Session

Once configured via the software, remove the TREX-8 from the docking station. To initiate recording, press and hold the "Start/Mark" button on the device until the "OK" indicator light flashes. The device will begin logging data according to the programmed settings.

3. Monitoring Status Indicators

NaplóTag TREX-8 showing Alert and OK indicators

Image: Close-up of the LogTag TREX-8 showing the "ALERT" (red) and "OK" (green) indicator lights, along with the "Start/Mark" button.

4. Downloading Data

To download recorded data, re-insert the TREX-8 into the LTI-HID Docking Station while it is connected to your computer. Open the LogTag Analyzer software. The software will automatically detect the recorder and prompt you to download the data. Once downloaded, you can view, analyze, and export the temperature logs.

Karbantartás

Hibaelhárítás

ProblémaLehetséges okMegoldás
Device not detected by software.Docking station not connected or drivers not installed.Ensure LTI-HID Docking Station is securely connected to USB. Reinstall LogTag Analyzer software to ensure drivers are present.
"ALERT" light is on.Temperature has gone outside configured limits.Check the environment where the probe is placed. Download data to review the temperature excursion details.
Device not starting recording.Not properly configured or "Start/Mark" button not held long enough.Re-configure the device using LogTag Analyzer. Ensure the "Start/Mark" button is pressed and held until the "OK" light flashes.
Pontatlan hőmérsékleti értékek.Damaged probe or incorrect probe connection.Check the probe for visible damage. Ensure the probe is securely connected to the TREX-8 unit.

Műszaki adatok

FunkcióRészlet
ModellTREX-8
Szonda típusaExternal ST100S-15 Remote Probe
Mérési tartomány-40°C és 85°C között (-40°F és 185°F között)
Pontosság±0.5°C
AkkumulátorNon-replaceable, 2-3 years typical life
Szükséges tartozékLTI-HID Docking Station (sold separately)

Jótállási információk

NaplóTag Recorders products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official LogTag felvevők webŐrizze meg a vásárlást igazoló bizonylatot garanciális igények esetén.

Legal Disclaimer: THIS PRODUCT IS NOT A VFC VACCINE MONITORING KIT - PLEASE SEE ITEM VAC-TRED30-KIT-2.

Támogatás

For technical support, software downloads, or additional product information, please visit the official LogTag felvevők website or contact their customer service department. Ensure you have your product model number (TREX-8) and any relevant purchase details ready when seeking support.

Official LogTag Bolt: NaplóTag Áruház az Amazonon

Kapcsolódó dokumentumok - TREX-8-AMZ

Előttiview NaplóTag TRED30-16CP Temperature Recorder Quick Start Guide
This Quick Start Guide provides essential instructions for setting up, configuring, and using the LogTag TRED30-16CP temperature recorder. It covers downloading the LogTag Analyzer software, starting the device, monitoring recordings, downloading results, and compatible accessories.
Előttiview NaplóTag TRED30-16U External Probe USB PDF Temperature Recorder Datasheet
Detailed specifications, features, and applications for the LogTag TRED30-16U, a multi-use USB PDF temperature logger designed for critical temperature monitoring in vaccine storage, transportation, medical centers, and laboratories. Features software-less operation, simplified LCD, and compliance with health guidelines.
Előttiview NaplóTag TRED30-16CP Gyors üzembe helyezési útmutató
Gyors üzembe helyezési útmutató a NaplóhozTag TRED30-16CP hőmérséklet-rögzítő, részletesen ismertetve a szoftver telepítését, az eszköz konfigurációját, az indítási és a rögzítés közbeni eljárásokat, az eredmények letöltését és a szükséges tartozékokat.
Előttiview NaplóTag TRED30-16U: USB PDF hőmérséklet-rögzítő felhasználói útmutató a hideglánc-monitorozáshoz
Átfogó felhasználói útmutató a naplóhozTag TRED30-16U USB PDF hőmérséklet-adatgyűjtő. Ismerje meg a funkcióit, konfigurációját, működését, adatértelmezését és a megbízható hőmérséklet-monitorozáshoz szükséges műszaki adatokat.
Előttiview NaplóTag Hőmérséklet-adatgyűjtő gyors üzembe helyezési útmutató
Gyors üzembe helyezési útmutató a LoghozTag TRIX, TREX, SRIC, TRIL, SRIL és TREL sorozatú hőmérséklet-adatgyűjtők, beleértve a szoftverbeállítást, az adatgyűjtők konfigurációját, működtetését, adatletöltését és karbantartását.
Előttiview NaplóTag CR2032 elemcsere útmutató
Lépésről lépésre útmutató a CR2032 elem cseréjéhez a NaplóbanTag adatrögzítők, beleértve az előkészítési, eltávolítási és telepítési eljárásokat.