ALLMATIC MASTER-D 4 csatornás fix kódú adó
A termék leírása
2 or 4-channels fix code transmitter, frequency 433.920 MHz.
- Key 1 = channel 1
- Key 2 = channel 2
- Key 3 = channel 3
- Key 4 = channel 4
- A. Transmission led
- B. Box
- C. Akkumulátor
Műszaki adatok
- Modell: MASTER-D
- Munka gyakorisága 433.920 MHz
- Terjedés type Fix Code
- Maximum distance Of transmission 50 – 100 m
- Csatornák 2 vagy 4
- Antenna Beépített
- Hatalom < 0.1mW
- Fogyasztás 18mA max. in transmission
- Akkumulátor típusa 12V 23A type
- Üzemi hőmérséklet 0 .. 55ºC
- Méretek 68 x 41 x 17 mm
- Súly 30 gr. (included battery)
Dip-switch setting for the selection of the transmission code
- Remove the box of the transmitter:
To open the box of the transmitter use a screwdriver as shown in the picture here below:
- Setting of Dip Switch code
For the programming of the transmitter, copy from the receiver or from another running transmitter the dip-switch codifying sequence.
Ismételje meg az eljárást az 1. ponttól kezdve minden egyes adó programozásához.
Figyelmeztetés: the dip-switch is fragile. Use a small sharp object to put the dipswitch as desired - Close the box of the transmitter
To close the box of the transmitter execute the procedure 1.1 in the opposite way.
Alacsony akkumulátor
- Advise for low battery:
If the blinking of the transmission Led is slow while pressing a key of the transmitter, this means that the battery is low. - Akkumulátor csere:
- A) Open the transmitter as indicated at 1.1.
- B) Replace the battery with an equivalent model (model 12V 23A).
- C) Close the box of the transmitter (1.3).
Jegyzet:
This device must be utilized exclusively in automation systems, such as doors, barriers, shutters, awnings, etc. For other types uses, the necessary permissions must be verified.
GARANCIA
A jogszabályi előírásoknak megfelelően a gyártói garancia a szamped on the product and is restricted to the repair or free replacement of the parts accepted by the manufacturer as being defective due to poor quality materials or manufacturing defects. The guarantee does not cover damage or defects caused by external agents, faulty maintenance, overloading, natural wear and tear, choice of incorrect product, assembly errors, or any other cause not imputable to the manufacturer. Products that have been misused will not be guaranteed or repaired. Printed specifications are only indicative. The manufacturer does not accept any responsibility for range reductions or malfunctions caused by environmental interference. The manufacturer’s responsibility for damage caused to persons resulting from accidents of any nature caused by our defective products, are only that responsibilities that come under European law.
Gyakran Ismételt Kérdések
K: Mi a termék maximális átviteli távolsága?
A: The maximum distance of transmission is not specified in the provided information.
K: Honnan tudom, hogy melyik csatornára van programozva egy adó?
A: Each key corresponds to a specific channel: Key 1 = channel 1, Key 2 = channel 2, Key 3 = channel 3, Key 4 = channel 4.
Dokumentumok / Források
 |
ALLMATIC MASTER-D 4 csatornás fix kódú adó [pdf] Használati utasítás MASTER-D 4 csatornás fix kódú adó, MASTER-D, 4 csatornás fix kódú adó, Fix kódú adó, Kódú adó, Adó |