AURA STORM-866DSP digitális hangprocesszor
Utasítás
Please be sure to read all the contents of user manual before using this product. This manual relates to the safety of the device, against improper operation of device damage.
Biztonsági információk
Please read the following notes carefully and install the product as required to avoid your loss.
- FIGYELMEZTETÉS: This device is for indoor installation or use in the cabinet, shall not be sprayed by liquid, and shall not place liquid objects on the device. Do not allow liquid to spill into any part of the device .
- FIGYELMEZTETÉS: Unplug the power cable of the device during lightning weather.
- FIGYELMEZTETÉS : When not using the device for a long time, should pay attention to moisture-proof, it is recommended that be powered up 3 hours a week .
Figyelmeztetés:
- Tápegység: 100V～240V.
- A tápkábel védelme: Properly wiring, avoid trampling or heavy objects squeeze.
- Karbantartás: All repairs must be carried out by certified maintenance personnel. Do not try to open the device to avoid the danger of electric shock .
- Nyílás: The devices have air vents or holes in their shells to prevent overheating of sensitive components. Don’t block the vent with anything .
Power Related Contents:
- Please make sure that the plug is tightly plugged and the cable is tightly connected, otherwise it may cause failure.
- Do not use loose power socket or damaged power cord, otherwise it may cause electric shock or fire.
- Do not touch the plug with wet hand under any circumstances, otherwise there is danger of electric shock.
- Do not plug multiple devices into one socket, otherwise it may cause fire .
- Do not press the heavy objects on the power cord to prevent bending, pulling or winding of the power cord .
További biztonsági információk:
- Users must read and understand all safety and usage instructions before using the device.
- Users should keep the user manual for future use .
Műszaki előírások
| Tétel | Műszaki adatok |
| Maximális bemeneti szint | 18 dBu |
| Max. Kimeneti szint | 18 dBu |
| Default Output Level | 0 dBu |
| THD+N | <0.003%；1kHz@+4dBu<0.0035%；1kHz@+10dBm<0.0035%；20Hz～20kHz@+4dBu |
| Frekvenciaválasz | 20Hz-20kHz, +/- 0.2dB |
| In To Out dynamic range | 110dB （Unrecorded right） |
| S/N | -110dB （Unrecorded right) |
| ADC dinamikus tartomány | CS5361 114dB |
| DAC dinamikus tartomány | CS4382A 114dB |
| DSP | 400Mhzfloating-point SHARC ADSP-21488 |
| Sampling Frekvencia | 48 ezer |
| QE | 24 bites |
| Tárolás | 32 |
| Vezérlési mód | 100M Ethernet |
| Nyelv | angol |
| Zajkapu | Igen |
| Visszacsatolás | Igen |
| Jelgenerátor | Igen |
| Pressure Limiter | Independent 12 channel |
| Késleltetés | Output 1-4 218msOutput 5-8 148ms |
| PEQ Low Shelf High Shelf | Independent 16 -band |
| High Pass/Low Pass Bessel Butter worth Link-Riley | Independent 12 channel
|
| Tétel | Műszaki adatok |
| Maximális bemeneti szint | 18 dBu |
| Max. Kimeneti szint | 18 dBu |
| Default Output Level | 0 dBu |
| THD+N | <0.003%；1kHz@+4dBu<0.0035%；1kHz@+10dBm<0.0035%；20Hz～20kHz@+4dBu |
| Frekvenciaválasz | 20Hz-20kHz, +/-0.2dB |
| In To Out dynamic range | 110dB （Unrecorded right） |
| S/N | -110dB （Unrecorded right) |
| ADC dinamikus tartomány | CS5361 114dB |
| DAC dinamikus tartomány | CS4382A 114dB |
| DSP | 400Mhzfloating-pointSHARC ADSP-21488 |
| Sampling Frekvencia | 48 ezer |
| QE | 24 bites |
| Tárolás | 32 |
| Vezérlési mód | 100M Ethernet |
| Nyelv | angol |
| Zajkapu | Igen |
| Visszacsatolás | Igen |
| Jelgenerátor | Igen |
| Pressure Limiter | Independent 12 channel |
| Késleltetés | Output 1-4 218msOutput 5-8 148ms |
| PEQ Low Shelf High Shelf | Independent 16-band |
| High Pass/Low Pass Bessel Butter worth Link-Riley | Independent 12 channel
|
Előlap
LCD képernyő
- ARM verzió
- Control IP address
- Hely leírása
- Egyéni tulajdonságok
- Electric running time
Audio funkció
- Gain, Gate, Xover, PEQ, Delay, Matrix, Limiter, All Mute, Setup, Copy, Save, Rec all
Data Wheel
- Data alignment
Input Level Indicator Light
- Above is input signal indicator light. When the input signal exceeds – 40dBu, the signal indicator light is illuminated, indicating that the audio signal is input from the corresponding channel. Below is auxiliary button and mute switch.
Output Level Indicator Light
Above is output signal indicator light. When the output signal exceeds -40dBu, the signal indicator light is illuminated, indicating that the audio signal is output from the corresponding channel. Below is auxiliary button and mute switch.
Hátsó panel
Főkapcsoló- AC bemenet
Support 100V~240V AC voltage, please use the standard power cable, use power outlet with grounding. - RS-232 interfész
Use to connect the third-party central control system . - Ethernet interfész
Connect to switch using standard 5 Ethernet networks, also can connect directly to laptop. - Audio Input Interface: Channel 1～4
Standard XLRF input, balance audio input interface. - Audio Output Interface: Channel 1～8
Standard XLRM output, balanced audio output interface.
Software Running Environment
- Operating system request: windows XP、Windows 7 32Bit 、windows 7 64Bit
- Storage space occupation: 50Mb
- Network environment: 100m LAN or wireless router
Szoftver kapcsolat
- The processor’s network cable is connected to the same switch with the computer. Turn on the power of this processor.
- This digital audio processor uses auto-discovery protocol. When the software is turned on, it can detect all the processors within the LAN.
- Close the windows firewall if the device List page cannot find the processor after opening the software.
- The following screenshot is a Windows 7 / 32-bit system .
- The functions of the control software may be partially disabled by the anti-virus software on your computer, resulting in the failure to work properly.
- If the antivirus software directly deletes or isolates some files in this software, please release the isolated files.
Jelszó Bejelentkezés
- Enter the password for operation when the processor is connected. Allow authorized personnel to control the processor parameters .
- Factory default user password：admin
Kezdőképernyő
| Device list The left side of the home screen displays the online processor IP address on the current network and the history connection IP address. When there are multiple processors on the network,
double-click the left IP address to control the switch. |
| Input level meter Each input: volume, compression level, noise gate, mute |
| Output level meter Each output: volume, compression level, noise gate, mute |
| Functional Level、 Gate 、Limiter 、Delay、 Matrix Mixer、 PEQ 、Signal、 Preset、 interface Setting 、Security |
Updata ARM firmware
When the system function is upgraded, the ARM firmware needs to be upgraded . As below:
Click the menu Updata ARM Firmware, it will pop up a dialog box, select the suffix for sbin firmware, click OK to upgrade progress bar, about 25 seconds to complete the upgrade, the device will restart automatically after the upgrade .
Updat a DSP firmware
When the DSP function is upgraded, the DSP firmware needs to be upgraded.
Az alábbiak szerint:
Click the menu Updata DSP Firmware, it will pop up a dialog box, select the suffix for ldr firmware, click OK to upgrade progress bar, about 10 seconds to complete the upgrade, the device will restart automatically after the upgrade .
Bejelentkezési jelszó módosítása
Enter the new password twice and click OK .
Modify Lock Password
The default lock password: ad123
Enter the old lock password, then enter the new password twice, then click OK . When the user needs to protect their debugging data, they can use the lock password to hide, encrypt and lock the debugging data .
Reset
If you want to restore the factory default settings, click OK, it will delete all user data . 
Eszközlista
The device list displays online processor IP address on the current network and history connection IP address (history IP address can be cleared). When there are multiple processors on the network, each processor must be on same network segment with different IP address. Each processor must enter the password individually. Click the IP address on the left side of the software interface to switch the processor .
Rendszer némítása
In the home screen there is a Mute button, click this button, the system will mute . System mute through the “Ctr+M” shortcut key for quick operation .
Bemeneti szint
The input volume is 0.1dBu step, and the marshalling can be made into 2 volume groups, push any one of the volume faders after marshalling and the grouped volume fader is pushed at the same time.
Bemeneti szűrő
- This processor supports independent filter and 16 – band PEQ for each channel. The input filter includes a variety of professional audio filtering modules: high pass, low pass, PEQ, LowShelf and HighShelf.
- The filter parameters can be copied and pasted quickly, which greatly improves the operation efficiency.
HPF/LPF support the following specifications :
| Bessel | -6dB/oct、-12dB/oct、-18dB/oct 、-24dB/oct、-36dB/oct、-48dB/oct |
| Butterworth | -6dB/oct、-12dB/oct、-18dB/oct、- 24dB/oct、-36dB/oct、-48dB/oct |
| Link-Riley | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct 、-36dB/oct、-48dB/oct |
Bemeneti szűrő
This processor supports independent filter and 16 -band PEQ for each channel. The input filter includes a variety of professional audio filtering modules: high pass, low pass, PEQ, LowShelf and HighShelf.
The filter parameters can be copied and pasted quickly, which greatly improves the operation efficiency.
HPF/LPF support the following specifications:
| Bessel | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct、-36dB/oct 、-48dB/oct |
| Butterworth | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct、-36dB/oct 、-48dB/oct |
| Link- Riley | -6dB/oct、-12dB/oct、-18dB/oct 、-24dB/oct 、-36dB/oct、-48dB/oct |
Bemeneti korlátozó
This processor supports independent input pressure limiter for each channel, starting threshold, compression ratio, startup time and recovery time can be adjusted. The parameters of the limiter can be copied and pasted quickly, which greatly improves the operation efficiency.
Mátrix keverő
Matrix mixing supports arbitrary crossover remix, and can also be used for parametric remixes by remix values.
Kimeneti szűrő
This processor supports inde pendent filter and 16 -band PEQ for each channel. The output filter includes a variety of professional audio filtering modules: high pass, low pass, PEQ, LowShelf and HighShelf.
The filter parameters can be copied and pasted quickly, which greatly improves the operation efficiency.
HPF/LPF support the following specifications :
| Bessel | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct、-36dB/oct、-48dB/oct |
| Butterworth | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct、-36dB/oct、-48dB/oct |
| Link-Riley | -6dB/oct、-12dB/oct、-18dB/oct、-24dB/oct、-36dB/oct、-48dB/oct |
Kimeneti limiter
This processor supports independent output pressure limiter for each channel, starting threshold, compression ratio, startup time and recovery time can be adjusted. The parameters of the limiter can be copied and pasted quickly, which greatly improves the operation efficiency.
Kimeneti késleltetés
Plample: There are two speakers in a square that are far away. To delay for a while, the sound of two speakers will be transmitted to the same point at the same time.
Előre beállított
- This processor can preset 32 modes, each mode can customize the English name. The preset name can be displayed under each IP address .
- The processor automatically uses the preset before shutdown .
- Preset parameters support data import and export function.
Előre beállított
- This processor can preset 32 modes, each mode can customize the English name. The preset name can be displayed under each IP address .
- The processor automatically uses the preset before shutdown .
- Preset parameters support data import and export function.
Beállítások elemre
- In the setting page, the input and output channel can be labeled management.
Megteheti view device firmware version and other information in the setting page .
| Eszköz modell | The device model is consistent with the display of the LCD screen. |
| ARM Ver. ARM version firmware number, firmware may be upgraded when ARM functionality is upgraded. | |
| DSP Ver. | DSP version firmware number, firmware may be upgraded when DSP functionality is upgraded. |
| Eszköz SN | Factory serial number or production batch code. |
| Panelzár | Choose Yes, panel unable to debug, enter password: admin to unlock |
| Csatorna Cfg. | Audio input and output channel configuration parameters |
| Boot Counts | Recording of device start-up times
If the device starts for a long time, we can use the recording to judge whether there is abnormal boot and restart phenomenon. |
| CPU Temp | The value of ARM CPU temperature sensor in the host, this
temperature parameter is normal below 70 degrees and abnormal above 70 degrees. |
| Futásidő | Running time of device after powerup, the time from 0 again after
kikapcsolni. |
| Teljes idő | The total service time of the device is accumulated every half hour. |
| Elhelyezkedés | Can setting the device location |
| Leírás | Can setting the device description |
Biztonság
The default lock password: ad123.
Enter the password to lock the function settings for each channel .
Gyakori hibaelhárítás
Unable to find the processor
Connect the device to the computer via a network cable on the same switch .
The default IP address: 192.168.1.128.
Vezetékes kapcsolat:
- Check your computer’s local connection network segment. As below :
- Then run the processor software, right-click the green dot on the left side of the home screen, and set the IP address. As below :
- The first three numbers of the IP address of the device must be the same as the computer local IP address. The last number is changed to 1-255, but it is different from the computer local IP address.
Vezeték nélküli kapcsolat:
- A wireless router is required to connect the device to the wireless router using a network cable. It should be connected to any port at the LAN branch port. Then connect to Wi-Fi. Check your computer’s segment of wireless network connection .
- Then run the processor software, right-click the green dot on the left side of the home screen, and set the IP address. As below :
- The first three numbers of the IP address of the device must be the same as the computer local IP address. The last number is changed to 1-255, but it is different from the computer local IP address.
Failed to make connection
The IP address on the left side of the home screen has a green dot. Click it without password dialog. In most cases, there is a conflict in the IP address. You must modify the IP address to resolve the problem.
Bejelentkezési hiba
When any of the login password or lock password is lost, please contact the supplier. The supplier assists in the host reset, all data will be cleaned up, you need to reset the system.
Dokumentumok / Források
 |
AURA STORM-866DSP digitális hangprocesszor [pdf] Felhasználói kézikönyv STORM-866DSP digitális hangprocesszor, STORM-866DSP, Digitális hangprocesszor, Hangprocesszor, Processzor |