1. Bevezetés és végeview
Thank you for choosing the LEONLITE 28W LED Security Light with GFCI Outlets. This product is designed to provide reliable outdoor illumination with enhanced functionality, featuring motion sensing, dusk-to-dawn operation, and integrated GFCI protected electrical outlets for convenient power access. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.
2. Biztonsági információk
WARNING: Risk of Electric Shock. Turn off power at the fuse box or circuit breaker before installation. Only use on 120V/60Hz circuits.
- This product is rated for wet locations. Do NOT use where direct water exposure occurs, as this can lead to electric shocks.
- Do NOT use this product near any source of heat.
- Tartsa ezt a terméket 3 év alatti gyermekek elől elzárva.
- Győződjön meg arról, hogy minden vezetékcsatlakozás biztonságos, és megfelel a helyi elektromos előírásoknak.
3. A csomag tartalma
The LEONLITE 28W LED Security Light package includes:
- 1 x LED Security Light Fixture
- 1 x Mounting Hardware Kit (including mounting bracket, screws, and wire nuts)
- 1 x Felhasználói kézikönyv
4. A termék jellemzői
- Dual GFCI Outlets: Two built-in Ground Fault Circuit Interrupter (GFCI) outlets provide safe and reliable power for outdoor tools and appliances, eliminating the need for additional wiring or wall outlets.
- Két világítási mód: Choose between Motion Sensor Mode (light activates at night when motion is detected) and Dusk to Dawn Mode (light remains on throughout the night and turns off automatically during the day).
- Állítható megvilágítás: Features 2500 lumens brightness from 28W LED, with adjustable lamp heads and a motion sensor that can be positioned for optimal coverage.
- Széles érzékelési terület: The motion sensor offers a 150° detection angle and a sensing range of 13ft to 45ft, suitable for various yard sizes.
- Konfigurálható késleltetés: Set the light to stay on for 30s, 60s, or 120s after motion is no longer detected.
- Tartós és tanúsított: ETL certified for quality and safety standards, designed for wet locations.
5. Beállítás és telepítés
Follow these steps for proper installation. It is recommended to have a qualified electrician perform the installation if you are unfamiliar with electrical wiring.
- Kapcsolja ki az áramellátást: Before starting, ensure the power to the installation area is OFF at the circuit breaker.
- A szerelési felület előkészítése: Remove any existing fixture and ensure the electrical box is clear.
- Szerelje fel a tartókonzolt: Secure the provided mounting bracket to the electrical box using the screws.
- Kábelezési csatlakozások: Connect the fixture's wires to your household wiring:
- Csatlakoztassa a zöld (földelő) vezeték a szerelvénytől a copper or green ground wire from the electrical box.
- Csatlakoztassa a fehér (nulla) vezeték a szerelvénytől a fehér neutral wire from the electrical box.
- Csatlakoztassa a fekete (forró) vezeték a szerelvénytől a fekete hot wire from the electrical box.
- Szerelvény rögzítése: Carefully push the wired connections into the electrical box and secure the light fixture to the mounting bracket.
- Állítsa be az Lamp Heads and Sensor: Adjust the two lamp heads and the motion sensor to your desired angles. The lamp heads are adjustable up to 320° horizontally and 120° vertically. The sensor is adjustable up to 170° horizontally and 140° vertically.
- Energia visszaállítása: Kapcsolja vissza az áramellátást a megszakítónál.
- Test GFCI Outlets: After powering on, press the 'RESET' button on the GFCI outlets to activate them. Press 'TEST' to ensure they trip, then 'RESET' to restore power.
Kép: Wiring diagram showing connections for hot, neutral, ground, and control wires to the GFCI security light assembly.
Kép: Diagram illustrating the adjustable range of the two lamp heads (320° horizontal, 120° vertical) and the motion sensor (170° horizontal, 140° vertical).
Videó: An official product video demonstrating the installation process and key features of the LEONLITE 28W LED Security Light with GFCI Outlets.
6. Használati útmutató
The security light offers two primary operating modes and adjustable settings for optimal performance.
Mód kiválasztása
Use the control switches located on the bottom of the motion sensor to select your preferred mode and adjust settings.
Kép: Close-up of the control switches for adjusting time delay (30s/60s/120s/TEST) and sensitivity (M/H/L) on the motion sensor.
- Mozgásérzékelő mód: The light remains off during the day. At night, it activates when motion is detected within its sensing range and angle.
- Dusk to Dawn Mode (D2D): The light remains on throughout the night, regardless of motion detection, and automatically turns off during the day.
Beállítások módosítása
- Időkésleltetés: Adjust the switch to set how long the light stays on after motion is no longer detected: 30s, 60s, or 120s. A 'TEST' mode is available for initial setup.
- Érzékenység: Adjust the switch to control the motion sensor's sensitivity (Low, Medium, High).
GFCI Outlets
The built-in GFCI outlets remain powered at all times as long as the main switch is on, regardless of the lighting mode or whether the light is on or off. Remember to press the 'RESET' button on the GFCI outlets after powering on to activate them.
Kép: The LEONLITE security light illuminating a patio area at night, highlighting the convenience of the built-in GFCI outlets for powering outdoor appliances.
7. Karbantartás
- Tisztítás: Rendszeresen tisztítsa meg a szerelvényt puha, damp cloth. Do NOT use abrasive cleaners or solvents.
- GFCI tesztelés: Test the GFCI outlets monthly by pressing the 'TEST' button. The outlet should trip, cutting off power. Press 'RESET' to restore power. If it does not trip, the GFCI may be faulty and should be replaced.
- Ellenőrzés: Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
8. Hibaelhárítás
| Probléma | Lehetséges ok | Megoldás |
|---|---|---|
| A fény nem kapcsol be. | No power, incorrect wiring, sensor settings. | Check circuit breaker. Verify wiring connections. Adjust sensor to 'TEST' mode and cover the sensor to check functionality. Ensure sufficient darkness for night operation. |
| A lámpa folyamatosan világít. | Dusk to Dawn mode selected, continuous motion, sensor malfunction. | Check if 'D2D' mode is selected. Ensure no continuous motion is within the sensor's range. Adjust sensor sensitivity or reposition. |
| GFCI outlets not working. | GFCI tripped, not reset. | Press the 'RESET' button on the GFCI outlets. If it repeatedly trips, consult an electrician. |
| A mozgásérzékelő nem érzékeli a jelet. | Incorrect sensitivity, obstructed sensor, improper angle. | Adjust sensor sensitivity to 'High'. Clear any obstructions. Reposition the sensor for optimal coverage. |
9. Műszaki adatok
| Funkció | Specifikáció |
|---|---|
| Márka | LEONLITE |
| Modellszám | A-94962 |
| Szín | Bronz |
| Wattage | 28 watt |
| Voltage | 120 Volt |
| Fényesség | 2500 Lumen |
| Világos szín | 5000K nappali fény (hideg fehér) |
| Anyag | Polikarbonát |
| Ellenőrzési módszer | Motion Sensor & Manual (Toggle) |
| Érzékelési szög | 150° |
| Érzékelési távolság | Max 45ft (13ft to 45ft adjustable) |
| Vízállósági szint | Waterproof (Wet Location Rated) |
| Üzemi hőmérséklet | -4°F és 104°F között |
| A tétel méretei (H x Sz x Ma) | 11.5 cm × 4.59 cm × 6.85 cm |
| Tétel súlya | 2.2 font |
| Tanúsítványok | ETL Listed |
Kép: Detailed dimensions of the LEONLITE 28W LED Security Light, including measurements for the light heads, sensor, and main body.
10. Garancia és támogatás
This LEONLITE product comes with a generous 3-year warranty, ensuring top-notch quality and safety standards. For any support or warranty claims, please contact LEONLITE customer service through their official channels.