Ulecoce U18R-B

Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set User Manual

Model: U18R-B

Bevezetés

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ulecoce Keyless Entry Door Lock Deadbolt with Handle Set. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Termékjellemzők

Diagram showing multiple unlocking methods for the Ulecoce smart lock.

Figure 1: Multiple Convenient Unlocking Methods. This image illustrates the various ways to unlock the Ulecoce smart lock, including keypad code, one-touch locking, one-time codes, anti-peeping password, physical key, and door knob.

A csomag tartalma

TételMennyiség
Deadbolt Front Lock1
Deadbolt Rear Lock1
Door Knob Front1
Door Knob Rear1
Zárjon reteszt2
Kulcsfontosságú2
Hole Opening Diagram1
Installation Tutorial Card1
Utasítás1
Mounting Plate Screws 1.46in/37mm (A)2
Mounting Plate Screws 1.19in/30mm (B)3
Mounting Plate Screws 0.24in/6mm (C)2
Fixed Leg (D)2
Silicone Ring (E)1
Alkatrészek4

Műszaki adatok

Diagram showing dimensions of the Ulecoce U18 Smart Door Lock Set.

Figure 2: U18 Smart Door Lock Set Core Advantages and Dimensions. This image provides detailed measurements of the lock components and highlights key features like one-touch lock, pin password, auto lock, door knob, 100 user codes, low battery alert, mechanical key, and IP54 waterproof rating.

Telepítési útmutató

The Ulecoce Keyless Entry Door Lock is designed for easy installation without the need for extra drilling. A screwdriver is the only tool required.

Door Compatibility Check

Győződjön meg róla, hogy az ajtó megfelel a következő előírásoknak:

Diagram illustrating easy installation without drilling and door compatibility requirements.

Figure 3: Easy Installation without Drilling. This image shows the required latch hole and door compatibility (single cylinder vs. mortise/integrated) and provides key measurements for backset and hole diameter.

Telepítés lépésről lépésre

  1. Készítse elő az ajtót: Ensure the door is clean and the existing holes are clear.
  2. Szerelje fel a reteszt: Insert the latch into the door edge and secure it with screws.
  3. Install the exterior keypad assembly: Route the cable through the door and align the keypad with the latch.
  4. Install the interior mounting plate: Secure the mounting plate to the exterior assembly using screws.
  5. Connect the cable and install the interior assembly: Connect the cable from the exterior unit to the interior unit. Secure the interior unit to the mounting plate.
  6. Install the door knob: Attach the handle set according to the provided diagram.
  7. Helyezze be az elemeket: Open the battery cover on the interior unit and insert 4 AA batteries (not included).
  8. Tesztelje a zárat: Verify that the deadbolt extends and retracts smoothly.
Image of the Ulecoce Keyless Entry Door Lock installed on a door.

Figure 4: Installed Ulecoce Keyless Entry Door Lock. This image displays the smart lock and handle set mounted on a white door, showcasing esztétikai integrációja.

Beállítás és programozás

Before initial use, you will need to set up administrator codes and user codes.

Kezdeti beállítás

  1. Set Administrator Code: Follow the instructions on the Installation Tutorial Card to set your primary administrator code. This code is essential for managing other user codes.
  2. Felhasználói kódok hozzáadása: You can program up to 97 user codes. These can be permanent, one-time, or scheduled codes.
Image of a person using a smartphone to send a one-time PIN code for the smart lock.

Figure 5: One-Time PIN Code Functionality. This image depicts a user sending a temporary access code via smartphone, highlighting the convenience of managing access remotely.

Anti-Peeping Password Feature

A biztonság fokozása érdekében véletlenszerű számjegyeket adhat meg a tényleges jelszava előtt vagy után. A zár továbbra is felismeri a helyes sorozatot a hosszabb számsorozaton belül.

Diagram showing the anti-peep tactile keypad feature, allowing extra digits before and after the correct code.

Figure 6: Anti-Peep Tactile Keypad. This image illustrates how the anti-peeping feature works, allowing users to input garbled numbers before and after the correct password to prevent code exposure.

Kezelési útmutató

Az ajtó kinyitása

Az ajtó zárása

Karbantartás

Diagram showing the internal components of the Ulecoce smart lock, including battery compartment and circuit boards.

Figure 7: U18 Zinc Alloy Lock Body and Internal Components. This image provides an exploded view of the lock, highlighting its robust zinc alloy construction and internal electronics, including the battery compartment.

Hibaelhárítás

ProblémaLehetséges okMegoldás
A zár nem reagál a billentyűzettel történő bevitelre.Low batteries; incorrect code entered; keypad malfunction.Replace batteries; re-enter code carefully; contact support if issue persists.
A biztonsági zár nem húzódik ki/be teljesen.Misalignment during installation; obstruction in door frame; low batteries.Check alignment of lock and strike plate; clear any obstructions; replace batteries.
Az automatikus zárolás funkció nem működik.Feature disabled; incorrect time setting; door sensor issue.Ensure auto-lock is enabled and set correctly in programming; check door closure.
Screws loosen after use.Normal wear and tear; insufficient tightening during installation.Periodically re-tighten all mounting screws.

Garancia és támogatás

Ulecoce is committed to providing peace of mind. We offer a 3 év termékgarancia és élettartamú értékesítés utáni szolgáltatás.

If you have any questions or concerns, please feel free to send us an email. Our customer support team is ready to assist you at any time, providing 24/7 email support and prompt responses to resolve your needs.

Támogatásért kérjük, látogassa meg a Ulecoce Store on Amazon or contact customer service via email (details typically found on product packaging or official webwebhely).