Bevezetés
Thank you for choosing the DEWIN B6 80W LiPo Balance Charger. This intelligent digital balance charger is designed for safe and efficient charging and discharging of various battery types, including LiPo, Li-ion, Li-Fe, NiMH, NiCd, and Pb batteries. Please read this manual thoroughly before operation to ensure proper use and to maximize the performance and lifespan of your charger and batteries.
Biztonsági információk
WARNING: Failure to follow these safety instructions can result in fire, property damage, or personal injury.
- A töltőt mindig jól szellőző helyen, gyúlékony anyagoktól távol használja.
- Soha ne hagyja felügyelet nélkül a töltőt működés közben.
- Ensure the charger is compatible with your battery type and cell count before connecting. Incorrect settings can cause severe damage.
- Ne töltsön sérült vagy felpuffadt akkumulátorokat.
- Tartsa távol a töltőt víztől, nedvességtől és szélsőséges hőmérséklettől.
- Use only the original power adapter and cables provided with the charger.
- Gyermekek elől elzárva tartandó.
- Disconnect the power supply immediately if any abnormal behavior is observed.
A csomag tartalma
Ellenőrizze, hogy minden tétel megvan-e a csomagban:
- 1 x DEWIN B6 80W LiPo Balance Charger
- 3 x Cable Sets (various connectors for different battery types)
- 1 x Használati útmutató
- 1 x Power Adapter (EU Plug, if selected)
Termék végeview
The DEWIN B6 80W LiPo Balance Charger features a robust metal casing for efficient heat dissipation and stable performance. Its intuitive LCD screen displays charging status and parameters, making it easy to monitor your battery's condition.
Főbb jellemzők:
- Fém Casing: Provides strong heat dissipation for stable and reliable operation.
- Input Voltage Vezérlés: Protects the battery during charging.
- Széleskörű kompatibilitás: Suitable for parallel charging of Li-Po, Li-ion, Li-Fe, NiMH, NiCd, and Pb batteries.
- LCD kijelző: Clear visualization of charging status and parameters.
- Sokoldalú teljesítmény: Max. 80W charge power / Max. 10W discharge power.
Alkatrész azonosítás:
This image displays the front of the DEWIN B6 80W LiPo Balance Charger, highlighting its compact dimensions of 133mm (5.2 inches) in length, 87mm (3.4 inches) in width, and 33mm (1.3 inches) in height. The LCD screen is visible, along with the control buttons and balance charging ports on the side.
Ez a kép részletes képet ad view of the charger's LCD screen, which displays charging information such as battery type, current, voltage, and cell count. Below the screen are four control buttons: "Batt Type/Stop", "Dec./Status", "Inc./Status", and "Start/Enter", used for navigation and selection.
This image shows the side of the charger, specifically the balance charging ports. These ports are labeled for 2, 3, 4, 5, and 6 cell batteries, allowing for precise balancing during charging to ensure optimal battery health and performance.
Beállítás
- Csomagolja ki a töltőt: Óvatosan távolítson el minden alkatrészt a csomagolásból.
- Vizsgálja meg a sérüléseket: Check the charger and all accessories for any signs of damage. Do not use if damaged.
- Csatlakoztassa az áramot:
- Connect the power adapter to the DC input port on the side of the charger.
- Plug the power adapter into a suitable AC outlet (240V input).
Figure 4: The power adapter with an EU plug, used to power the charger. This image shows the power adapter, which typically comes with an EU plug, used to supply power to the DEWIN B6 charger. Ensure it is securely connected to both the charger and a power outlet.
- Kezdőképernyő: The LCD screen will light up, displaying the initial menu or standby screen.
Kezelési útmutató
This section outlines the general steps for charging a battery. Specific settings will vary based on battery type.
General Charging Procedure:
- Az akkumulátor csatlakoztatása:
- Connect the main charging cable from the charger's output ports to your battery's main connector. Ensure correct polarity.
- For LiPo/Li-ion/Li-Fe batteries, also connect the battery's balance lead to the appropriate balance port on the side of the charger (e.g., 3 cells to the '3 cells' port).
- Válassza ki az akkumulátor típusát:
- Press the "Batt Type/Stop" button to navigate through the main menu.
- Use the "Inc." and "Dec." buttons to select the correct battery type (e.g., LiPo, NiMH).
- Press "Start/Enter" to confirm your selection.
- Set Charging Parameters:
- After selecting the battery type, the screen will display options for charging mode (e.g., Balance Charge, Fast Charge, Storage, Discharge). Use "Inc." and "Dec." to select the desired mode.
- Press "Start/Enter" to enter parameter adjustment.
- Adjust the charging current (Amps) and cell count (Volts) using "Inc." and "Dec." buttons. Refer to your battery's specifications for recommended charging rates.
- Press "Start/Enter" to confirm each parameter.
- Töltés indítása:
- Once all parameters are set, long-press the "Start/Enter" button. The charger will perform a battery check.
- Confirm the battery information displayed on the screen. If correct, press "Start/Enter" again to begin charging.
- Haladás figyelése:
- The LCD will display real-time charging status, including current, voltage, és az eltelt idő.
- Press "Status" (Inc. or Dec.) to cycle through detailed battery information during charging.
- Töltés vége:
- The charger will automatically stop when the battery is fully charged. An audible alert may sound.
- Press "Batt Type/Stop" to stop the charging process manually at any time.
- Válassza le az akkumulátort a töltőről.
Karbantartás
- Tisztítás: A töltő külsejének tisztításához puha, száraz ruhát használjon. Ne használjon folyékony tisztítószereket vagy oldószereket.
- Tárolás: A töltőt hűvös, száraz helyen, közvetlen napfénytől és szélsőséges hőmérséklettől védve tárolja.
- Kábelvizsgálat: Regularly inspect all cables and connectors for wear, damage, or corrosion. Replace damaged cables immediately.
- Szellőzés: Ensure the charger's ventilation slots are clear of dust and debris to maintain proper heat dissipation.
Hibaelhárítás
| Probléma | Lehetséges ok | Megoldás |
|---|---|---|
| A töltő nem kapcsol be. | No power supply; faulty adapter/cable. | Check power connections. Ensure adapter is plugged in and functional. Try a different outlet. |
| "Connection Break" error. | Battery not connected properly; faulty cable. | Ensure main and balance leads are securely connected. Inspect cables for damage. |
| "Input Voltage Error". | Bemenet voltage túl magas vagy túl alacsony. | Verify the power adapter output voltagAz e a megadott tartományon belül van (DC 10.0–20.0 V). |
| Battery not charging/discharging. | Incorrect battery type/parameters selected; battery is fully charged/discharged. | Double-check battery type, cell count, and charging current settings. Ensure the battery is not already at its target state. |
| Charger gets excessively hot. | Poor ventilation; overcurrent charging. | Ensure adequate airflow around the charger. Reduce charging current if it exceeds battery specifications. Stop charging if overheating persists. |
Műszaki adatok
| Paraméter | Érték |
|---|---|
| Márka | DEWIN |
| Modellszám | CONN829 |
| Operation Voltage Tartomány | DC 10.0-20.0V |
| Circuit Power (Max Charge) | 80W |
| Circuit Power (Max Discharge) | 10W |
| Töltési áram tartomány | 0.1-6.0A |
| Kisülési áram tartomány | 0.1-2.0A |
| LiPo Balancing Current | 300mAh/cella |
| Li-ion/LiPo/Li-Fe Cell Count | 1-6 sejtek |
| NiCd/NiMH Cell Count | 1-15 sejtek |
| Pb akkumulátor töltöttségi szintjetage | 2-20V |
| Méretek (H x Sz x Ma) | 133 x 87 x 33 mm (5.2 x 3.4 x 1.3 hüvelyk) |
| Súly | 661 gramm (kb.) |
| Szín | Fekete |
| Tanúsítványok | CE |
Garancia és támogatás
DEWIN products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official DEWIN webKérjük, őrizze meg a vásárlást igazoló bizonylatot garanciális igények esetén.
Note: Availability of spare parts is not specified. Software updates are not applicable for this device.